Home Inspection Nashville TN » Franklin TN

Missing Secondary HVAC Drain Pan

Bill Collins — Wed, 09 Dec 2009 11:42:39 +0000

Secondary drain pans are necessary when a furnace or air handler is installed above living space in a structure such as the attic. Primary drain pans inside the units can become clogged or leak causing moisture to penetrate the ceiling below causing water damage as well as mold. The secondary pan should either be plumbed to the exterior of the structure or have a float switch installed that shuts down the unit if the pan becomes filled with water.

Share and Enjoy:

Antioch TN Inspections Improper Installed Roof Flashing

Bill Collins — Tue, 08 Dec 2009 03:15:23 +0000

Roof leaks can often be found around the protrusions of a roof such as the electrical mast or plumbing vent stack pipes. It is very important the flashing around these protrusions be properly installed. The roofing shingles should be placed on top of the flashing and extend down both sides to the bottom side of the protruded pipe. The shingles should also be glued with roof cement to the flashing to prevent wind and rain from penetrating under and around the flashing.

Share and Enjoy:

Franklin TN Often Find Poor HVAC Clearance

Bill Collins — Sat, 05 Dec 2009 12:16:01 +0000

Improper HVAC Clearance

Per the manufacture of heat pumps and cooling condensers, the units require a minimum clearance of 3′ to properly dissipate the air so the systems can perform as designed. Often times home owners plant bushes or shrubs around the units to hide them from view. During a home inspection, Ultra Sound Home Inspections always recommend these these items be trimmed or removed for maximum heating and cooling efficiency.

Improper HVAC Clearance

Share and Enjoy: